Iron Water Filter Ideal For Homes With Iron And Manganese Content In The Home Water Supply

Any home that has iron, manganese or hydrogen sulfide content in their water supply will no doubt be an ideal candidate for adding a whole house iron water filter to the home’s water treatment system. Such a whole iron water filter will have manganese greensand that helps in lowering the contaminants via oxidation or filtration. Using such water treatment system will help to considerably improve the clarity, taste as well as remove odor from the water, and also protect the plumbing system within the home that also includes the toilets, bath tubs as well as showers.

Improves The Performance Of Home Appliances

The iron water filter will also improve the performance of appliances such as dishwashers and clothes washers by preventing unwanted staining, and because no harmful chemicals are added to the water, your drinking water will be absolutely safe to drink. If you have a reverse osmosis system installed in your home, it will be protected as well through the iron and manganese reduction method that helps extend the life of the reverse osmosis membrane.

You ought to install your iron water filter on the main cold water line, and you will get better results if you use pre-sediment and post-carbon treatment. There are a number of advantages to using such water filters including minimal costs of installing and using competitive iron removal systems, ease in replacing worn out cartridges, no backwashing needed and effectiveness over a wide pH range.

The iron water filter should be used in a home application where there is low or moderate ferrous iron, manganese, or hydrogen sulfide contamination. With the help of mechanical filtration, the iron water filter is also able to remove ferric iron. In any case, you will get best results when the iron contamination level is not more then 5 ppm or hydrogen sulfide levels are lower than 2 ppm. In case these levels are exceeded, the iron water filter will still remove the contaminants, but it may cause the life of the iron water filter to be shortened, and the contaminant may only be partially removed. In any case, the life of the iron water filter is dependent on the contamination level as well as amount of water consumed every day.

The way that the iron water filter work involves soluble iron and manganese being oxidized and precipitated when there is contact between higher oxides of manganese on the greensand granules. Sometimes, it may be advisable to use sediment pre-filter in advance of the iron water filter so that you can get extended life from the iron reduction cartridge.